logo Yuhuan Enrui Machinery Co., Ltd   chinaENGLISH
 
恩锐专业生产汽车制动钳、感载比例阀、离合器分泵
 
关于我们 Your Position:Home | How to properly use the lights to check the bulb precautionary
 
Company Profile
Device Center
Network
Location
Contact Us
 
联系我们
Address:No.4, Industrial Park Road,Kanmen Street, Yuhuan Country, Zhejiang Province
Tel:0576-87550259
Fax:0576-87550259
Email:brakecaliper@zjenrui.com
Skype: +8615967077743
Wechat/WhatsApp: +8615967077743
QQ: 1229718019
 
 
How to properly use the lights to check the bulb precautionary
 
How to properly use the lights to check the bulb precautionary
Release time:2012.10.05 News source:Yuhuan Enrui Machinery Co., Ltd Browsing number:
 
◆ lights using the required specification
Car lights running lights, low beam lights, high beam, fog lights, turn lights, down lights and several duties. Driver because of the abuse of high beam to be punished by the traffic police, went so far to say that they do not know the low beam lights the difference!

 
◆ running lights: that the orientation of the size of

The first block of the light switch, when the car's dashboard lights all lit, front and rear is also lit two small lights. The brightness of two lamps is not to let the body corners to be seen. Usually in the darkening sky, rainy or dark place in underground parking lots should be illuminated running lights.

◆ near light: night basically relied

Urban driving at night. The one hand, the city's roads have street lighting does not require high beam to probe according to the road in the distance, just to see the road conditions in front of the car; the other hand, the urban road traffic is heavy, then open high beam not only caused by car at the opposite drivers dazzling, but also have an impact of pedestrians on the road on both sides of the line of sight.

◆ high beam: suitable for wilderness

Suitable for use the high beam in the wilderness or no street lighting on the road, but the car should be in exchange for nearly light, opposite the driver to avoid glare. High beam lights, car dashboard of eye-catching blue lights will be lit as a reminder.

◆ turn signal: turn to remember to use it

Uses the basic turn signal is given when the vehicle turns the other vehicles and passers-by turn signal to alert others to pay attention. Sometimes turn signal acts as a lighting effect in a narrow place, so that drivers observe both sides of the obstacle. From the turn lights on both sides at the same time open warning Chairman shows wide role.

◆ fog lights: bad weather helper

Name suggests, fog lights in heavy rain heavy fog light signals stronger penetration fog lights in fog, and therefore make it easier for vehicles and pedestrians early noted.

◆ reversing lights: Reduce reversing blind spot

Reversing when the rear of the vehicle will be white reversing lights lit on the one hand can illuminate the rear of the pavement, obstructions, reduce blind spots when reversing, to remind the other hand, the rear pedestrians.

◆ Check the lamp precautionary

Normal use and routine maintenance of the vehicle to pay attention to ground to check whether the nocturnal showing the wide lights, fog lights, brake lights work properly if the lamp black, should be replaced.

◆ carry bulbs to be spare

Vehicle to read the manual, usually to keep in mind the structure of the light bulb, socket, good preparation in advance, in order to cope with the temporary situation occurred. Various types of light bulbs, if conditional, should be ready to brake lights and direction indicators spares.

◆ lights fogging determine the cause

Lights dust cover cracking, easy to make driving rain into the headlights, the formation of mist in the shade. Once the lights influent, the brightness will be affected, also possible to make the circuit plug corrosion Light damage. In this case, the owner can open the headlight dust cover, and turn on the headlights. The open headlights after 10 minutes, the lights inside the mist began to disappear, to completely disappear after one hour. If there is a mist, it is necessary to professional service station for processing.

◆ adjust the lighting is very particular about the

If necessary, the owner manual based on the use of vehicles prompts appropriate to adjust the height of the beam of the headlights. Generally speaking, the right lights should be completely level direct left lights should be revised upwards to 10 cm. The headlight adjustment can not be too high, so as not to shine to the eyes of car drivers spend opposite.

In addition, the width of the headlight illumination can also properly adjusted, it is recommended that the right headlight beam is adjusted slightly to the right, so even in low visibility, rain and fog on the right side of the road can be seen more clearly. Under the load of a person's status, the lights can be adjusted to a more balanced.
 
Copyright © 2012 Yuhuan Enrui Machinery Co., Ltd   Address:No.4, Industrial Park Road,Kanmen Street, Yuhuan Country, Zhejiang Province
Tel:0576-87550259  Fax:0576-87550259  Technical support:www.censt.cc